SECTION I INTRODUCTION - TM-11-6625-613-40P0003

TM 11-6625-613-40P

SECTION I

INTRODUCTION

AHItem to be assembled at the general support

1. Scope

maintenance level.

This manual lists spares and repair parts; special tools;

XDA support item that is not stocked. When required,

special test, measurement, and diagnostic equipment

item will be procured through normal supply

(TMDE), and other special support equipment required

channels.

for performance of direct support and general support

NOTE

maintenance of the AN/ASM-120. It authorizes the

requisitioning and issue of spares and repair parts as

Cannibalization or salvage may be used

indicated by the source and maintenance codes.

as a source of supply for any items

source coded above except those coded

XA and aircraft support items as

2. General

restricted by AR 700-42.

This Repair Parts and Special Tools List is divided into

the following sections:

(2) Maintenance code. Maintenance codes

a. Section II. Repair Parts List. A list of spares

are assigned to indicate the levels of maintenance

and repair parts authorized for use in the performance of

authorized to USE and REPAIR support items. The

maintenance. The list also includes parts which must be

maintenance codes are entered in the third and fourth

removed for replacement of the authorized parts. Parts

positions of the Uniform SMR Code format as follows:

lists are composed of functional groups in numeric

(a) The maintenance code entered in

sequence, with the parts in each group listed in figure

the third position will indicate the lowest maintenance

and item number sequence.

level authorized to remove, replace, and use the support

b. Section III. Special Tools List. Not applicable.

item. The maintenance code entered in the third position

c. Section IV. National Stock Number and Part

will indicate one of the following levels of maintenance:

Number Index. A list, in National item identification

number (NIIN) sequence, of all National stock numbers

Code

Application/Explanation

(NSN) appearing in the listings, followed by a list, in

HSupport item is removed, replaced, used at the

alphameric sequence, of all part numbers appearing in

general support level.

the listings. National stock numbers and part numbers

(b) The maintenance code entered in

are cross-referenced to each illustration figure and item

the fourth position indicates whether the item is to be

number appearance.

repaired and identifies the lowest maintenance level with

the capability to perform complete repair (i.e.; all

3. Explanation of Columns

authorized maintenance functions). This position will

contain one of the following maintenance codes:

a. Illustration. This column is divided as follows:

Code

Application/Explanation

(1) Figure number.

Indicates the figure

HThe lowest maintenance level capable of complete

number of the illustration on which the item is shown.

repair of the support item is the general support

(2) Item number. The number used to identify

level.

item called out in the illustration.

ZNonreparable. No repair is authorized.

b. Source, Maintenance, and Recoverability (SMR)

(3) Recoverability code. Recoverability codes

Codes.

are assigned to support items to indicate the disposition

(1) Source code. Source codes indicate the

action on unserviceable items. The recoverability code is

manner of acquiring support items for maintenance,

entered in the fifth position of the Uniform SMR Code

repair, or overhaul of end items. Source codes are

format as follows:

entered in the first and second positions of the Uniform

Recoverability

SMR Code format as follows:

codes

Definition

Code

Definition

ZNonreparable item. When unserviceable, condemn

PAItem procured and stocked for anticipated or known

and dispose at the level indicated in position 3.

usage.

HReparable item. When uneconomically reparable,