 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 11-6625-3050-24P
SECTION I
INTRODUCTION
(1) Figure number. Indicates the
Scope
1.
figure number of the illustration on
which the item is shown.
This manual lists spares and repair
parts; special tools; special test,
(2) Item number. The number used
measurement, and diagnostic equipment
to identify item called out in the
(TMDE), and other special support equip-
illustration.
ment required for performance of organi-
zational, direct support, and general
b. Source. Maintenance. and Recover-
support maintenance of the SG-1205(V)1/U.
ability ( S M R ) Codes.
It authorizes the requisitioning and
issue of spares and repair parts as
(1) Source code. Source codes
indicated by the source and maintenance
codes.
indicate the manner of acquiring sup-
port items for maintenance, repair, or
2.
overhaul of end items. Source codes
General
are entered in the first and second
This Repair Parts and Special Tools List
positions of the Uniform SMR Code for-
is divided into the following sections:
mat as follows:
a. Section II. Repair Parts List.
Code
Definition
PA -- Item procured and stocked for
A list of spares and repair parts au-
thorized for use in the performance of
anticipated or known usage.
maintenance.
The list also includes
XA -- Item is not procured or stocked
because the requirements for
parts which must be removed for replace-
the item will result in the re-
ment of the authorized parts. Parts
placement of the next higher
lists are composed of functional groups
in numeric sequence, with the parts in
assembly,
XB -- Item is not procured or stocked.
each group listed in figure and item
number sequence.
If not available through sal-
vage, requisition.
XD -- A support item that is not stocked.
Special Tools List.
b. Section III.
--
Notapplicable.
When required, item will be pro-
cured through normal supply
c. Section IV. National Stock Num-
channels.
berand Part Number Index. A list, in
National item identification number
NOTE
(NIIN) sequence, of all National stock
numbers (NSN) appearing in the listings,
Cannibalization or salvage
may be used as a source of
followed by a list, in alphameric se-
quence, of all part numbers appearing
supply for any items source
in the listings. National stock numbers
coded above except those
and part numbers are cross-referenced
coded XA and aircraft sup-
port items as restricted by
to each illustration figure and item
number appearance.
AR 750.1.
3.
Explanation of Columns
(2) Maintenance code. Mainte-
nance codes are assigned to indicate
a.
the levels of maintenance authorized
Illustration.
This column is
to USE and REPAIR support items. The
divided as follows:
1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals