|
|
T.O. 12P4-2APX-192
NAVAIR 16-35TS1843-1
TM 11-6625-1646-25
9. Vary AN,/UPM-98A SIF CODER panel SUB PULSE POS
8. Vary AN/UPM-98A SIF CODER panel SUB PULSE POS
control to obtain 0.07 usec spacing between oscilloscope
control to vary 20th time mark from 20.3 (0.3) usec from first
reference point and the 50% point of the second bracket
time mark.
Observe that C-6280(P)./ APX or C-
pulse. waveform B (figure 7-3). 10. Adjust TS-1843A/APX
6280A(P),/APX TEST indicator is not on below 20.0 usec or
A4C6 until C-6280(P)/ APX or C-6280A(P) APX TEST
above 20.6 usec. If correct results are not obtained perform
indicator just lights. 11. Repeat step 8.
steps 9 through 11. If correct results are obtained turn off test
equipment and disconnect alignment connections.
7-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |