Source code - TM-11-6140-224-13-P0038

TM 11-6140-224-13&P

NOTE

Complete repair: Maintenance capacity, capability, and authority to perform all

corrective maintenance tasks of the "Repair" function in a use/user environment in

order to restore serviceability to a failed item.

(1) Source code. The source code tells you how to get an item needed for maintenance, repair, or overhaul of an

end item/equipment. Explanations of source codes follows:

Code

Explanation

Stocked items; use the applicable NSN to

request/requisition items with these source codes. They are

authorized to the category in PC indicted by the code entered in

the third position of the SMR code.

NOTE

Items coded PC are subject to deterioration.

Items with these codes are not to be individually. They are part

of a kit which is authorized to the maintenance category

indicated in the third position of the SMR code. The complete kit

must be requisitioned and applied.

Items with these codes are not to be requested/requisitioned

individually. They must be made from bulk material which

is identified by the part number in the description and usable on

code (UOC) column and listed in the Bulk Material group of the

repair parts list. If the item is authorized to you by the third

position code of the SMR code, but the source code indicates it

a higher category, order the item from the higher category of

maintenance.

Items with these codes are not to be requested/requisitioned

individually. The parts that make up the assembled item must be

requisitioned or fabricated and assembled at the

category of maintenance indicated by the source code. If the

disposition code of the SMR code authorizes you to replace the

item, but the source code indicates the item is assembled at a

higher order the item from the higher category of maintenance.

AD-Assembled by Depot

XA-Do not requisition an "XA" coded item. Order its next higher assembly.

XB-If an "XB" item is not available from salvage, order it using the FSCM and part number given.

XC-Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturers part number.

XD--Item is not stocked. Order an "XD" coded item through normal supply channels using the FSCM and part number

given, if no NSN is available.

NOTE

Cannibalization or controlled exchange, when authorized, may be used as

a source of supply for items with the above source codes, except for those

source coded XA or those aircraft support items restricted by requirements

of AR 750-1.

C-2