|
|
TM 11-5995-208-24&P-1
CONNECTOR UG-1870A/U REPLACEMENT (CONT)
TYPE B CONNECTOR
TOOLS: Refer to items 10, 14, and 18 through 21 in appendix B (MAC), section III.
Connector UG-1870A/U kit
60/40 solder
MATERIALS/PARTS: Masking tape
PERSONNEL: Two technicians
1. Using wire cutters, snip cable (1) as close as possible to old connector. (Discard old
connector.)
CAUTION
Many parts are coated with sealants and lubricants. Do not remove these materials from
parts.
When laying parts out, do not allow parts to become dirty. Place them in a clean tray or
on a lint-free cloth.
2. Lay out parts as shown in following illustration
3-18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |