Recoverability code - TM-11-5985-348-24P0005

TM 11-5985-348-24P

Code

Definition

corporation, of Government activity), which controls the

O-

Support item is removed, replaced, used at the

design and characteristics of the item by means of its

organizational level.

engineering drawings, specifications, standards, and

F-

Support item is removed, replaced, used at the

inspection requirements to identify an item or range of

direct support level.

H-

Support item is removed, replaced, used at the

items.

general support level.

NOTE

D-

Support items that are removed, replaced, used

When a stock numbered item is

at depot, mobile depot, specialized repair activ-

ity only.

requisitioned, the repair part received

may have a different part number

(b) The maintenance code entered in

than the part being replaced.

the fourth position indicates whether the item is to be

f. Description. Indicates the Federal item name

repaired and identifies the lowest maintenance level with

and, if required, a minimum description to identify the

the capability to perform complete repair (i.e., all

item.

authorized maintenance functions). This position will

g. Unit of Measure (U/M). Indicates the standard of

contain one of the following maintenance codes:

the basic quantity of the listed item as used in performing

the actual maintenance function. This measure is

Code

Application/Definition

expressed by a two-character alphabetical abbreviation

H-

The lowest maintenance level capable of com-

(e.g., ea, in, pr, etc). When the unit of measure differs

plete repair of the support item is the general

support level.

from the unit of issue, the lowest unit of issue that will

D-

The lowest maintenance level capable of com-

satisfy the required units of measure will be

plete repair of the support item is the depot

requisitioned.

level

h. Quantity Incorporated in Unit. Indicates the

Z-

Nonreparable. No repair is authorized.

quantity of the item used in the breakout shown on the

(3) Recoverability code. Recoverability codes

illustration figure, which is prepared for a functional

are assigned to support items to indicate the disposition

group, subfunctional group, or an assembly.

action on unserviceable items. The recoverability code is

entered in the fifth position of the Uniform SMR Code

4. Special Information

format as follows:

a. Usable on codes are shown in the description

Recoverability

column. Uncoded items are applicable to all models.

codes

Definition

Identification of the usable on codes used in this

Z-

Nonreparable item. When unserviceable, con-

publication are:

demn and dispose at the level indicated in

Code

Used on

position 3.

CNX

AB-585/G

H-

Reparable item. When uneconomically repar-

CN5

AB-1221/G

able, condemn and dispose at the general

CN4

MK-1725/G

support level.

DEB

AB-1238/G

D-

Reparable item. When beyond lower level repair

b. Detailed assembly instructions for items source

capability, return to depot. Condemnation and

disposal not authorized below depot level.

coded to be assembled are found in TM 11-5985-

A-

Item requires special handling or condemna-

34814&P. Assembly components are listed immediately

tion procedures because of specific reasons

following the item to be assembled.

(i.e., precious metal content, high dollar value,

c. The following publication pertains to the

critical material or hazardous material). Refer

to appropriate manuals/directives for specific

AB585/G, AB-1221/G, AB-1238/G, and MK-1725/G and

instructions.

their components: TM 11-5985-348-14&P, Tower AB-

585/G, Extension, Tower AB-1221/G, and AB-1238/G

c. National Stock Number. Indicates the National

and Accessory Kit, Tower MK-1725/G.

stock number assigned to the item and will be used

d. National stock numbers (NSN's) that are missing

for requisitioning purposes.

from P source coded items have been applied for and

d. Federal Supply Code for Manufacturer (FSCM).

will be added to this TM by future change/ revision when

The FSCM is a 5-digit numeric code listed in SB 708-

they are entered in the Army Master Data File (AMDF).

41/42 which is used to identify the manufacturer,

Until the NSN's are established

distributor, or Government agency, etc.

e. Part Number. Indicates the primary number

used by the manufacturer (individual, company, firm,