Row 1 Equipment Bays - TM-11-5895-932-14-P0013

TM11-5895-932-14&P

modems. Modem bay 1.4 contains four WU

am connected between the AMME (COMP) and

2200/24 modems and the Versitron equipment for

appropriated circuit modems (modem) by cable

the Communications Line Interface (CLI). Modem

connectors on the rear of the module Two dc

bay 1.5 contains eight Timplex modems with

patch modules are of the 2-wire type, each con-

associated power supplies and a MDS power

taining 12 normalled through circuits and used for

supply. Signal cables connect on the rear of each

low level dc patching (black). The bottom panels

individual modem (fig. 1-5).

are used for miscellaneous (MISC) and interbay

c. Black IDF Bay 1.6 (fig. 1-6) The black IDF

(INT BAY) 2-wire connections and has facilities

bay contains cable terminating blocks mounted on

for 48 two-wire patch connections. All permanent

a metal frame. The cable blocks are used to ter-

connections to the patch panels are at the rear of

minate and/or crossconnect signal cables on the

the bay (fig. 1-8). The MISC patch panel has the

black side of the signal path through the PTF.

first 8 rows (top and bottom jacks) connected to

d. Black Patch Buy 1.7 (fig 1-7). The black

the monitor (MON IN) jack strip of each

patch bay contains seven patch modules (patch

multichannel patch panel. The INT BAY panel is

panels) and a rollout shelf. Three patch panels are

tied directly (jack to jack) to the INT BAY patch

multicircuit or 12-wire types. Each multicircuit

panel (dc) on bay 1.8.

module handles 16 each 12-wire data circuits which

1-10