Special Information - TM-11-5895-431-34P0007

TM 11-5895-431-34P

will contain one of the following maintenance codes:

abbreviation (e.g., ea, in, pr, etc). When the unit of

Code

Application/Explanation

measure differs from the unit of issue, the lowest unit of

issue that will satisfy the required units of measure will

F--The lowest maintenance level capable of complete

be requisitioned.

repair of the support item is the direct support level.

h. Quantity Incorporated in Unit. Indicates the

H--The lowest maintenance level capable of complete

quantity of the item used in the breakout shown on the

repair of the support item is the general support level.

illustration figure, which is prepared for a functional

D--The lowest maintenance level capable of complete

group, subfunctional group, or an assembly. A "V"

repair of the support item is the depot level.

appearing in this column in lieu of a quantity indicates

Z--Nonreparable. No repair is authorized.

that no specific quantity is applicable, (e.g., shims,

(3) Recoverability code.

Recoverability

spacers, etc).

codes are assigned to support items to indicate the

disposition action on unserviceable items.

The

recoverability code is entered in the fifth position of the

Special Information

Uniform SMR Code format as follows:

a. Usable on codes are shown in the

description column. Uncoded items are applicable to all

Recoverability

models. Identification of the usable on codes used in

codes

Definition

this publication are:

Z--Nonreparable item. When unserviceable, condemn

Code

Used on

and dispose at the level indicated in position 3.

B4W

AN/TSQ-43

F--Reparable item. When uneconomically reparable,

AII

AN/TSQ-43A

condemn and dispose at the direct support level.

b. The following publications pertain to the

H--Reparable item. When uneconomically reparable,

AN/TSQ-43 and AN/TSQ-43A and their components.

condemn and dispose at the general support level.

D--Reparable item. When beyond lower level repair

TM 5-4120-259-15, Air Conditioner, Floor Mounting

capability return to depot. Condemnation and disposal

208V, 3-Phase, 60 Hz, ac; 36,000 btu/hr; York

not authorized below depot level.

Corporation Model MA3-F23A, Therm-Air Mfg. Co.

c. National Stock Number.

Indicates the

Model CB-36-08-3-60.

National Stock number assigned to the item and will be

TM 5-4120-259-25P, Air Conditioner; Base-Mounted, Air

used for requisitioning purposes.

Cooled, 208V, 3-Phase, 60 Cycle, ac, Single

d. Federal Supply Code for Manufacturer

Package, 36,000 btu/hr (York Corp. Model MA3-

(FSCM). The FSCM is a 5-digit numeric code listed in

F23A) (Therm-Air Mfg. Co. Model CB-36-08-3-60)

SB 708-41/42 which is used to identify the manufacturer,

TM 5-4520-233-14, Heater, Space, Multi-fuel w/blower,

distributor, or Government agency, etc.

60,000 BTU/HR (Hunter Models UH-68D and UH-

e. Part Number. Indicates the primary number

68E)

used by the manufacturer (individual, company, firm,

TM 5-4520-233-24P, Heater, Space, Multi-fuel w/blower,

corporation, or Government activity), which controls the

60,000 BTU/HR (Hunter Models UH-68D and UH-

design and characteristics of the item by means of its

68E)

engineering drawings, specifications, standards, and

TM 5-6115-365-15, Generator Sets, Gasoline and Diesel

inspection requirements to identify an item or range of

Engine Driven, Trailer Mounted PU-236A/G, PU-

items.

236/G, PU-236B/G; PU-253A/U, PU-253/U; PU-

304C/MPQ-4; PU-3321G, PU-332A/G; PU-375A/G,

NOTE

PU-375/G, PU-375B/G; PU-401/M: PU-4021M; PU-

When a stock numbered item is

406/M; PU-409/M, PU-409A/M; PU-495/G; PU-551/G;

requisitioned, the repair part received

PU-564AIG, PU-564B/G; PU-617/M; PU-618/M: PU-

may have a different part number

6191M; PU-620/M; PU-6251G;PU-628/G; PU-629/G;

than the part being replaced.

PU-631/G; and PU-6561G

Description. Indicates the Federal item

TM 11-5805-295-14P, Mountings MT-791/U and MT-

name and, if required, a minimum description to identify

791A/U

the item.

11-5810-221-12P,

Communications

Security

g. Unit of Measure (U/M).

Indicates the

Equipment TSEC/KW-7, TSEC/KW with KWX-

standard of the basic quantity of the listed item as used

10/TSEC

in performing the actual maintenance function. This

measure is expressed by two-character alphabetical