|
|
TM 11-5895-431-20P
(3) Recoverability code. Recoverability codes are
Code
Used on
assigned to support items to indicate the disposition
BrW
AN/TSQ-43
action on unserviceable items. The recoverability code is
All
AN/TSQ-43A
entered in the fifth position of the Uniform SMR Code
b. The following publications pertain to the
format as follows:
AN/TSQ-43 and AN/TSQ-43A and their components.
Recoverability
TM 5-4120-259-15, Air Conditioner, Floor Mounting,
codes
Definition
208v, -3 Phase, 60 hz, ac; 36,000 btu/hr; York
Corporation Model MA3-F23A; Therm-Air
Z - Nonreparable item.
When unserviceable,
Mfg.Co. Model CB-36-08-3-60
condemn and dispose at the level indicated in
TM 5-4120-259-25P, Air Conditioner; Base Mounted, Air
position 3.
Cooled, 208v, 3 Phase, 60 Cycle, ac, Single
F - Reparable
item.
When
uneconomically
Package, 36,000 btu/hr (York Corp. Model MA3-
reparable, condemn and dispose at the direct
F23A) (Therm-Air Mfg. Co. Model CB-36-08-3-
support level.
60)
H - Reparable
item.
When
uneconomically
TM 5-4520-209-24P, Heater, Space: Fuel Oil and
reparable, condemn and dispose at the general
Gasoline; 60,000 btu; Floor Instl; Van Type;
support level.
120v, Single Phase, 60 Cycle (Hunter Model UH-
D - Reparable item. When beyond lower level repair
68-2).
capability, return to depot. Condemnation and
TM 5-4520-233-14, Heater, Space, Multi-fuel w/blower,
disposal not authorized below depot level.
60,000 BTU/HR (Hunter Models UH-68D and
c. National Stock Number. Indicates the National
UH-68E)
stock number assigned to the item and will be used for
TM 5-4520-233-24P, Heater, Space, Multi-fuel w/blower,
requisitioning purposes.
60,000 BTU/HR (Hunter Models UH-68D and
d. Federal Supply Code for Manufacturer (FSCM).
UH-68E)
The FSCM is a 5-digit numeric code listed in SB 708-
TM 5-6115-365-15, Generator Sets, Gasoline and Diesel
41/42 which is used to identify the manufacturer,
Engine Driven, Trailer Mounted PU-236A/G, PU-
distributor, or Government agency, etc.
236/G, PU-236B/G, PU-253A/U, PU-253/U, PU-
e. Part Number. Indicates the primary number
304C/MPQ-4, PU-332/G, PU-332A/G, PU-
used by the manufacturer (individual, company, firm,
375A/G, PU-375/G, PU375B/G, PU-401/M, PU-
corporation, or Government activity), which controls the
402/M, PU-406/M, PU-409/M, PU-409A/M, PU-
design and characteristics of the item by means of its
495/G, PU-551/G, PU-564A/G, PU564B/G, PU-
engineering drawings, specifications, standards, and
617/M, PU-618/M, PU-619/M, PU-620/M, PU-
inspection requirements to identify an item or range of
625/G, PU-628/G, PU-629/G, PU-631/G, and
items.
PU656/G
NOTE
TM 11-5805-201-12, Telephone Set TA-312/PT
When a stock numbered item is requisitioned,
TM 11-5805-201-20P, Telephone Set TA-312/PT
the repair part received may have a different part
TM 11-5805-295-14P, Mountings MT-791/U and MT-
number than the part being replaced.
791A/U
f. Description. Indicates the Federal item name
TM
11-5810-221-12P,
Security
and, if required, a minimum description to identify the
Equipment TSEC/KW-7, TSEC/KW-7 with KWX-
item.
10/TSEC (FOUO)
g. Unit of Measure (UIM). Indicates the standard of
TM 11-5815-200-12, Teletypewriter Sets AN/FGC-20,
the basic quantity of the listed item as used in performing
AN/FGC-20X,
AN/FGC-21,
AN/FGC-66,
the actual maintenance function. This measure is
AN/FGC-159, AN/FGC-159X, AN/FGC-160,
expressed by a two-character alphabetical abbreviation
AN/FGC-177,
AN/UGC-4,
AN/UGC-29,
(e.g., ea, in, pr, etc). When the unit of measure differs
AN/UGC-29X and Teleprinter TT-259/FG
from the unit of issue, the lowest unit of issue that will
TM 11-5815-200-20P, Teletypewriter Sets AN/FGC-20,
satisfy the required units of measure will be
AN/ FGC-159X, AN/FGC-20X, AN/FGC-21,
requisitioned.
AN/FGC-177, AN/FGC-66, AN/UGC-4, AN/FGC-
h. Quantity Incorporated in Unit. Indicates the
159, AN/FGC-160, AN/UGC-29 and AN/UGC-
quantity of the item used in the breakout shown on the
29X
illustration figure, which is prepared for a functional
TM 11-5815-238-12, Teletypewriter Sets AN/GGC-3,
group, subfunctional group, or an assembly.
AN/GGC-3A, AN/GGC-53 and AN/GGC-53A and
4. Special Information
Teletypewriter Reperforator-Transmitters TT-
a. Usable on codes are shown in the description
76/GGC, TT-76A/GGC, TT-76B/GGC, TT-
column. Uncoded items are applicable to all models.
76C/GGC, TT-699/GGC, TT-699B/GGC
Identification of the usable on codes used in this
publication are:
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |