SECTION I INTRODUCTION - TM-11-5895-1179-23P0004

TM 11-5895-1179-23P/EE132 - EA- PLO-010/E106 KY883/TO 31S1-2GSC-164

SECTION I

INTRODUCTION

Scope

Code

Definition

This manual lists spares and repair parts; special tools;

special test, measurement, and diagnostic equipment

a minimum quantity be available in the

(TMDE), and other special support equipment required

supply system.

for performance of organizational, direct support, and

PC -

Item procured and stocked and which otherwise

general support maintenance of the KY-883/GSC. It

would be coded PA except that it is

authorizes the requisitioning and issue of spares and

deteriorative in nature.

repair parts as indicated by the source and maintenance

PD - Support item, excluding support equipment,

codes.

procured for initial issue or outfitting and

stocked only for subsequent or additional

General

initial issues or outfittings. Not subject to

This Repair Parts and Special Tools List is divided

automatic replenishment.

into the following sections:

PE -

Support equipment procured and stocked for

a. Section II. Repair Parts List. A list of

initial issue or outfitting to specified

spares and repair parts authorized for use in the

maintenance repair activities.

performance of maintenance. The list also includes

PF -

Support equipment which will not be stocked but

parts which must be removed for replacement of the

which will be centrally procured on demand.

authorized parts. Parts lists are composed of functional

PG -

Item procured and stock to provide for sustained

groups in numeric sequence, with the parts in each

support for the life of the equipment. It is

group listed in figure and item number sequence.

applied to an item peculiar to the equipment

b. Section III.

Special Tools List.

Not

which, because of probable discontinuance

applicable.

or shutdown of production facilities, would

c. Section IV National Stock Number and Part

prove uneconomical to reproduce at a later

Number Index. A list, in National item identification

time.

number (NIIN) sequence, of all National stock numbers

KD -

An item of a depot overhaul/repair kit and not

(NSN) appearing in the listings, followed by a list, in

purchased separately. Depot kit defined as

alphameric sequence, of all part numbers appearing in

a kit that provides items required at the time

the listings. National stock numbers and part numbers

of overhaul or repair.

are cross-referenced to each illustration figure and item

KF -

An item of a maintenance kit and not purchased

number appearance.

separately. Maintenance kit defined as a kit

that provides an item that can be replaced

Explanation of Columns

at organizational or intermediate levels of

a. Illustration.

This column is divided as

maintenance.

follows:

KB -

Item included in both a depot overhaul/repair kit

(1) Figure number. Indicates the figure

and a maintenance kit. .

number of the illustration on which the item is shown.

MO - Item to be manufactured or fabricated at the

(2) Item number. The number used to

organizational level.

identify item called out in the illustration.

MF -

Item to be manufactured or fabricated at the

b. Source, Maintenance, and Recoverability

direct support maintenance level.

(SMR) Codes.

MH - Item to be manufactured or fabricated at the

(1) Source code. Source codes indicate

general support maintenance level.

the manner of acquiring support items for maintenance,

MD - Item to be manufactured or fabricated at the

repair, or overhaul of end items. Source codes are

depot maintenance level.

entered in the first and second positions of the Uniform

AO -

Item to be assembled at organization level.

SMR Code format as follows:

AF -

Item to be assembled at direct support

maintenance level.

Code

Definition

AH - Item to be assembled at general support

maintenance level.

PA -

Item procured and stocked for anticipated or

known usage.

PB -

Item procured and stocked for insurance

purpose because essentiality dictates that