|
|
Changes in force: C 2, C 3, and C 4
TM 11-405-10
C4
CHANGE )
HEADQUARTERS
)
DEPARTMENT OF THE ARMY
No. 1
)
WASHINGTON, D.C., 28 November 1966
TM 11-405-10, 28 May 1958, is changed as follows:
Note. The parenthetical reference to a previous change
Page 52, appendix II (page 3 of C 2).
Delete and
(example: page 1 of C 2) indicates pertinent material
substitute.
was published in that Change.
APPENDIX II
BASIC ISSUE ITEMS
Section I. INTRODUCTION
Recoverability code and its explanation
1. General
is as follows:
Note. When there is no code indicated in the
This appendix lists items for Processing
recoverability column, the part will be considered expendable .
Equipment PH-406 and Photographic Film Processing
Units ES-20(1) and ES-20(2), the component items
Code
Explanation
comprising it, and the items which accompany it, or are
required for installation, operation, or operator's
R
Applies
to
repair
parts
and
maintenance.
assemblies that are economically
repairable at PSU and GSU
2. Explanation of Columns
activities and are normally
furnished by supply on an
An explanation of the columns in section II is
exchange basis.
given below.
b. Federal Stock Number, Column 2.The
a. Source, Maintenance, and Recoverability
Federal stock number for the item is indicated in this
Codes, Column 1.
column.
(1) Source code, column 1a. Not used.
c. Description, Column 3. The Federal item
(2) Maintenance code, column lb. The
name, a five-digit manufacturer's code, part number, and
lowest category of maintenance
when required, the model designator (*), which indicates
authorized to install the listed item is
different models of the end equipment, are included in
noted here. The maintenance code
this column.
used is as follows:
d. Unit of Issue, Column 4. The unit used as a
Code
Explanation
basis of issue (e.g. ea, pr, ft, yd, etc.) is noted in this
O
Organizational maintenance
column.
(3) Recoverability code, column 1c. The
information in this column indicates
whether unserviceable items should be
returned for recovery or salvage.
1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |