DISASSEMBLY AND REASSEMBLY OF CLUTHCH AND BRAKE ASSEMBLY

TM 11-3895-209-14

5-11. DISASSEMBLY AND REASSEMBLY OF CLUTHCH AND BRAKE ASSEMBLY - Continued

E Remove the bolt (8), lock washer (9),

and outer drive belt guide (10).

F Remove the retaining ring (11), and slip

the idler bearing (12) off the idler shaft

(14).

G Remove the retaining ring (1 3).

H Unscrew and remove the idler shaft

(14) and the inner drive belt guide (15).

I Unscrew the control lever handle (23) from the control

arm (26).

NOTE

If control lever handle is cemented to the control

arm, do not attempt to remove the handle unless

absolutely necessary.

J Remove the bolts (24), lock washers (25), and then

remove the control arm (26).

5-10