REMOVAL AND REPLACEMENT OF BELT GUARD ASSEMBLY

TM 11-3895-209-14

5-6. REMOVAL AND REPLACEMENT OF BELT GUARD ASSEMBLY

REMOVAL

A Remove the 13 mounting bolts and lock washers

that attach the belt guard assembly to the frame.

B Tilt the guard assembly outward at the bottom, lift it

upward until it is clear of the two control levers, and

remove it from the equipment.

REPLACEMENT

A Lift the guard assembly above the control levers

with the lower end of the guard tilted outward.

Lower the guard assembly over the control levers

so that the levers pass through the two slots in the

top of the guard.

B Aline the bolt holes in the flange of the guard

assembly with the threaded holes in the frame and

install and tighten the 13 mounting bolts and lock

washers.

5-7. REMOVAL AND REPLACEMENT OF FUEL TANK

REMOVAL

A Remove the belt guard assembly.

B Remove the fuel filter and lines and drain the fuel tank (refer to para 4-11).

5-3