Special Information. - TB-9-2300-378-140200

TB 9-2300-378-14

(7) Not Applicable.

(8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry

When density of

for each special tool, special TMDE, and other special support equipment.

equipments supported exceeds density spread indicated in the basis of issue, the total authorization is

increased proportionately.

g. U/M (Column (7)). The Unit of Measure (U/M) indicates the measure (e.g., foot, gallon, pound) or

count (e.g., each, dozen, gross) of a listed item. A two-character alpha code (e.g., FT, GL, LB, EA, DZ,

GR) appears in this column to indicate the measure or count. If the U/M code appearing in this

column differs from the Unit of Issue (U/I) code listed in the Army Master Data File (AMDF), request

the lowest U/l that will satisfy your needs.

Quantity Incorporated in Unit (QTY INC IN UNIT) indicates the

h. QTY INC IN UNIT (Column (8)).

quantity of the item used in the breakout shown on the illustration figure, which is prepared for a

functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a

quantity indicates that no specific quantity is applicable (e.g., shims, spacers).

B-4. Special Information.

a. Not Applicable.

b. Bulk materials required to manufacture items are listed in the Bulk Material Group of this manual.

NSN's for bulk materials are also referenced in the description column of the line entry for the item to

Detailed manufacturing instructions for items source coded to be

be manufactured/fabricated.

manufactured or fabricated are found in TM9-2350-253-20, TM9-2350-253-34, TM9-2350-222-20,

TM9-2350-222-34, TM5-5420-226-20, TM5-5420-226-34, TM5-5420-202-20, and

TM5-5420-202-34.

c. Detailed assembly instructions for items source coded to be assembled from component

spare/repair parts are found in TM9-2350-253-20, TM9-2350-253-34, TM9-2350-222-20, TM9-2350-

222-34, TM5-5420-226-20, TM5-5420-226-34, TM5-5420-202-20, and TM5-5420-202-34. Items

that make up the assembly are listed immediately following the assembled item entry.

d. Line item entries for repair kits and sets appear as the last entries in the repair parts listing for

the figure in which their parts are listed as repair parts.

e. Not Applicable.

f. Not Applicable.

g. Not Applicable.

B-6