D u s t Detector Warning Light Box Assembly Replacement (M48A5 AVLB, M60A1 AVLB)

TB 9-2300-378-14

D u s t Detector Warning Light Box Assembly Replacement (M48A5 AVLB, M60A1 AVLB)

(1) Removal

Disconnect harness connector from dust detector warning light box

(a)

assembly.

Remove two screws, n u t s and lockwashers securing bracket and dust

(b)

detector warning light box assembly to support bracket.

Remove dust detector warning light box assembly from support bracket.

(c)

NOTE

If support bracket is to be replaced go to step (d).

Remove two screws and lockwashers securing support bracket to launcher

(d)

basket.

Remove bracket.

(e)

(2) Installation

NOTE

If support bracket was removed go to step (a), if not, go to step (b).

Position support bracket on launcher basket and secure using two screws and

(a)

lockwashers.

(b) Position bracket and dust detector warning light box assembly on support

bracket and secure using two screws, lockwashers and nuts.

CAUTION

Do not overtighten harness connector. Damage to connector

may result if overtightened.

(c) Connect harness connector to dust detector warning light box assembly.

6-64