Dust Detector Warning Light Box Assembly Replacement (M728)

TB 9-2300-378-14

Dust Detector Warning Light Box Assembly Replacement (M728) (Fig. 6-25).

( 1 ) Removal.

(a) D i s c o n n e c t h a r n e s s c o n n e c t o r f r o m d u s t d e t e c t o r w a r n i n g l i g h t b o x

assembly.

( b ) Remove two screws, nuts and lockwashers securing bracket and dust

detector warning light box assembly to gage indicator panel support bracket.

(c) Separate dust detector warning light box assembly from bracket.

(2) Installation

(a) Position bracket a n d dust detector warning light box assembly on gage

indicator support b r a c k e t .

( b ) Secure dust detector warning light box assembly and bracket to gage

indicator support bracket with two screws, lockwashers and nuts.

CAUTION

Do not overtighten harness connector.

Damage to

connector may result, if overtightened.

(c) Connect harness connector to dust detector warning light box assembly.

6-62