Install Outriggers

TB 9-2300-378-14

Install Outriggers No. 3 and No. 4

(4)

NOTE

Check all new outriggers from kit to ensure the holes

for air cleaner mounting bolts are drilled to 21/32 inch

( . 6 5 6 inch) in places indicated for each outrigger as

shown on figure 4-22. If the holes are to be 21/32 inch

a r e 3/8 inch are 3/8 inch tapped holes, enlarge the

three holes on each outrigger to 21/32 inch.

Perform steps 1 through 5 to both left and right sides of

vehicle.

(a)

Using four new screws MS90725-183 and new lockwashers MS35338-51, install

new outrigger 12290526-1 (lt) or 12290526-2 (rt) to number 3 outrigger inner

support bracket (fig. 4-23, view A). Torque four screws to 130 lb-ft (172

Nm) lubricated. Secure new outrigger to inner support bracket at top with

new screw MS90725-112 and new nut MS51922-33.

(b)

Install outer support bracket 11655113-1 (lt) or 8762504 (lt) or 11655113-2 (lt)

or 8762503 (rt) to number 3 outrigger using two new bolts MS35764-1289.

Torque to 25 lb-ft (34 Nm) lubricated. Install new bolt MS35764-1291 and

n e w flat washer MS27183-17 attaching outer support bracket to base of

outrigger number 3. Torque bolt to 25 lb-ft (34 Nm) lubricated.

(c)

Using four new screws MS90725-183 and new lockwashers MS35338-51, install

new outrigger 12290527-1 (lt) or 12290527-2 (rt) to number 4 outrigger inner

T o r q u e four screws to 130 lb-ft (172 Nm)

s u p p o r t bracket (view B).

l u b r i c a t e d . Secure new outrigger to inner support bracket at top with two

new screws MS90725-112 and new nuts MS51922-33 (fig, view B).

(d)

I n s t a l l outer support bracket 8762503 (lt) or 8762504 (rt) to number 4

outrigger using two new bolts MS35764-1289. Torque bolts to 25 lb-ft (34

Nm) lubricated.

(e)

Install new bolt MS35764-1291 and new flat washer MS27183-17 attaching

outer support bracket to base of outrigger number 4. Torque bolt to 25 lb-ft

(34 Nm) lubricated.

4-35