Aluminum Side or Top Loading Air Cleaner Replacement

TB 9-2300-378-14

4-10. Aluminum Side or Top Loading Air Cleaner Replacement

General.

When an aluminum air cleaner becomes unserviceable, it should be replaced with the

armored air cleaner. Currently, the M60 series tanks may be furnished with one of the

following listed air cleaners:

Aluminum Side Loading Air Cleaners (ALSLAC)

P/N

10863539- (Left) earlier model

P/N

10863540- (Right) earlier model

P/N

10940233-1, NSN 2940-00-067-7922- (Left)

P/N

10940233-2, NSN 2940-00-067-7926- (Right)

Aluminum Top Loading Air Cleaner (ALTLAC)

P/N

11655320-1,

NSN

2940-00-621-1427-

(Left)

P/N

11655320-2,

NSN

2940-00-621-1428-

(Right)

P/N

11675951-1,

NSN

2940-00-455-2427-

(Left)

P/N

11675951-2,

NSN

2940-00-455-2511-

(Right)

NOTE

Only DS/GS personnel are authorized to accomplish the air

c l e a n e r replacement.

b. Parts Required.

When the aluminum side or t o p loading air cleaners are being replaced with the

armored top loading air cleaners, hardware kits 12290568 and 12290570 are required.

The armored air cleaner assembly is not part of these kits and must be requisitioned

separately.

W h e n replacing aluminum side loading air cleaners with armored top

loading air cleaners, the existing fender extensions are not used and must be replaced

with new fender extensions. These fender extensions are not part of the armored air

cleaner kits and must be requisitioned separately. Fender extensions required are:

Left Fender Extension - NSN 2510-00-455-1351, P/N 11659711-1

Right Fender Extension - NSN 2510-00-455-1352, P/N 11659711-2

Tools Required.

3/8-16 UNC-2B Tap

5136-00-276-1032

Sander Disk

5130-00-857-8526

3433-00-357-8116

Torch Outfit

3431-00-903-5647

Welder, Arc

Drill 5/16

5133-00-227-9662

Procedures.

Replace aluminum air cleaner as follows:

(1) Remove aluminum air cleaner (TM20-1)

4-26