Inspection Requirements. - SB-740-91-010262

SB 740-91-01

Figure B-20. Equipment and Test Units

for Making Sensitivity Measurements.

3.0 Inspection Requirements.

The following mechanical-visual inspections are applicable to all AN/ARC-51 series systems, sets, units, and assemblies

and further define the coded inspection criteria give in appendix A.

(1)

Inspect equipment covers and front panels for condition of finish and panel markings.

(2)

Inspect for dents, punctures, or warped areas.

(3)

Inspect spring lock fasteners and receptacles.

(4)

Inspect external surfaces for loose or missing screws or washers.

(5)

Inspect receptacles for condition of pins, contacts, mounting, and for foreign particles.

(6)

Inspect air filters and air outlet for excessive dirt or grit.

B-74