0 SSS-013-003-2 Test Cable No. 1.

SB 740-91-01

9.0 SSS-013-003-2 Test Cable No. 1.

This cable and SSS-013-003-3 Power Cable may be available under NSN 6625-00-880- 0149, which is covered by SC-D-

621015. If not available, these instructions cover the items. This cable, when used with power cable, has been designed

for universal usage in SSS's.

a. Material Required.

(1)

U-344/VRC connector, receptacle, electrical, 1 each

(2)

Terminal board, plastic, type PBE, 0.25 x 2.5 x 9.5 inches

(3)

Nut MS-35649-286, 36 each

(4)

Washer MS-5795-907, 18 each

(5)

Screw, Type I, Style 8s, brass, 8-32 UNC-28 x 0.75 inches long, 18 each

(6)

Terminal lug MS-25036-49, 17 each

(7)

Terminal lug MS-25036-53, 5 each

(8)

Sleeving AWG, Size No. 5

(9)

Insulation tubing, class 2, 0.750 x 32.25 inches, 1 each

(10)

Twine, type P, class 2, waxed

(11)

Wire No. 18 AWG, approximately 48 feet of different colors, see wiring

harness diagram, and construction

(12)

Wire, No. 14 AWG, approximately 10 feet of different colors, see wiring

harness diagram, and construction.

b. Construcetion.

(1)

Mark cable SSS-013-003-2 Test Cable No. 1

(2)

Mark terminal letters on terminal board as shown in the first diagram

below

(3)

Prepare cable wires as shown in the second diagram below. Wires to

terminals A, B and C are No. 14 AWG, with all others No. 18 AWG.

(4)

Securely crimp terminal lugs to wire ends on terminal board end. Terminal

lugs MS-25036-53 for wire No. 14 AWG, and-terminal lugs MS-25036-49 for

wire No. 18 AWG.

(5)

Sleeving, AWG size No. 5 is for covering terminals after soldering wires

to U-344/VRC connector

(6)

Bundle wires, lace with waxed twine, and cover with insulation tubing

(7)

The terminal board and terminals are constructed as shown in the first

diagram below.

(8)

Construct two jumpers as follows:

(a)

No. 14 AWG wire with terminal lugs between terminals B and C

(b)

No. 18 AWG wire with terminal lugs between terminals C and J

(9)

Individual contacts on the connector are connected to the identical letter

on the terminal board

8-26