SSS-013-002-3 RF Attenuator.

SB 740-91-01

4. SSS-013-002-3 RF Attenuator.

a. Materials Required.

(1)

Connector, Jl and J2, UG-447/U, 2 each, 5930-00-259-3880

(2)

Resistor, Ri, 56 ohms, 1 percent, 1 W, 1 each, 5905-00-114-1607

(3)

Resistor, R2, 510 ohms, 1 percent, 1 W, 1 each

(4)

Aluminum container, approximately 6 x 2.5 x 2.5 inches, 1 each

(5)

Wire, stranded, No. 8 AWG, 8 inches, 6145-00-160-5291.

b. Construction.

(1)

Make all ground terminations to container

(2)

Mark container SSS-013-002-3 RF Attenuator

(3)

Mark Jl-to Test Set

(4)

Mark J2-to Equipment.

c. Schematic of RF Attenuator.

5. SSS-013-002-4 Test Cable No. 1.

a. Materials Required.

(1)

Connector UG-88A/U, 1 each, 5935-00-258-4576

(2)

Banana Plug, 2 each, 5935-00-405-0338

(3)

Cable RG-58/U, 40 inches, 6145-00-542-6092.

b. Construction.

(1)

Mark cable SSS-013-002-4 Test Cable No. 1

(2)

The 3 inch ends with bananna plugs will be protected by covering

with insulation sleeving or tape

(3)

Check for continuity and shorts after construction.

3-23