Disassembly - (cont.) - TM-5-4930-233-140367

TM 5-4930-233-14

TM 4930-14/1

LUBE TANK ASSEMBLY

5-19. HIGH PRESSURE PUMP - REPAIR - (Cont.)

Disassembly - (cont.)

CAUTION

For initial disassembly take care not to damage adapter (71) when unthreading.

Adapter threads are coated with sealant.

(24) Remove lower spring clip (69), and upper coupler (3) from rod (70).

(25) Unthread adapter (71) and pull free from assembly tube (72).

(26) Unthread primer body (73), and remove stop nut (74), plate (75), valve seat (76), gasket (77), valve body

(78), three packings (79), screw (80) and guide washer (81).

(27) Remove lower spring clip (82) from lower coupler (83) and unthread piston and cylinder assembly (84).

(28) Pull tube (72) loose from piston and cylinder assembly and remove two gaskets (85).

(29) Pull adapter (71) up over primer rod (86) to expose roll pin (87).

(30) Drive out roll pin (87) and remove adapter (88), gasket (89), ball (90), spring (91) and spring retainer (92).

5-108