 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-4930-233-14
TM 4930-14/1
LUBE TANK ASSEMBLY
5-19. HIGH PRESSURE PUMP - REPAIR
a.
Disassembly - (cont.)
(14) Pull air tube (35) from cylinder head and plug assembly (36) and remove two preformed packings (37).
(15) Lift out cylinder (38) and remove preformed packing (39).
(16) Remove retaining ring (40), washer (41) and block v packing (42) from underside of valve body and stop
assembly (24).
(17) Loosen nut (43) and remove piston rod (44).
(18) Secure trip rod (47) and remove nut (48), preformed packing (49) and nut (50).
(19) Remove plug (51), adapter (52), washer (53), and bushing (54).
(20) Remove six tie rods (55) and two screws (56).
(21) Remove three screws (57), body (58) and two preformed packings (59).
(22) Remove two gaskets (60), washers (61) and spacer (62).
(23) Push out through bottom of body (58), washer (63), seal (64), lantern ring (65), seal (66), spacer (67) and
preformed packing (68).
Change 1 5-106
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals