Assembly - TM-5-4930-233-140356

TM 5-4930-233-14

TM 4930-14/1

LUBE TANK ASSEMBLY

5-18. LOW PRESSURE PUMP (Cont.)

NOTE

The lubricant and sealant referred to below are included in the air motor major repair kit (TM5-

4930-233-24P).

(7)

Install preformed packing (66), spacer (65), seal (64), lantern ring (63), seal (62), and washer (61) into body

(56). Be sure that lips of seals face downward.

(8)

Install spacer (60), washer (59), and two gaskets (58).

(9)

Install two preformed packings (57), body (56) and three screws (55).

(10) Install two screws (54) and six tie rods (53).

(11) Install bushing (52), washers (51) and adapter (50) and plug (49).

(12

Coat threads of trip rod (45) with sealant and install nut (48), a preformed packing (47) and nut (46).

(13) Install nut (41), packing (44), and two washers (43) onto piston rod (42).

(14) Tighten piston rod (42) to nut (48) and then tighten nut (41). Coat piston rod (42) with lubricant.

(15) Install block V

packing (40), washer (39) and retaining ring (38) to underside of valve body and stop

assembly (22).

(16) Install preformed packing (37) and cylinder (36).

(17) Install two preformed packings (35) and air tube (33) onto cylinder head and plug assembly (34).

Change 1 5-97