ENGINE OIL DISPENSER

TM 5-4930-233-14

TM 4930-14/1

REEL CABINET ASSEMBLY

5-8. ENGINE OIL DISPENSER - REPAIR

This task covers:

a. Disassembly

b. Repair

c. Assembly

INITIAL SET-UP:

Materials/Parts

Equipment Condition

Dry cleaning Solvent

Engine oil dispenser removed

(Item 6, App. E)

Tools

General Mechanics

Tool Box (Section III, Item 1, App B)

a. Disassembly

(1)

Remove four screws (1) and remove dial assembly (2), gasket (3) and totalizer (4).

(2)

Remove nozzle assembly (5) and extension (6).

(3)

Remove outlet fitting body (7), preformed packing (8), metering mechanism (9) and spur gear (10).

(4)

Remove setscrew (12), worn gear (13), flatwasher (14), gear and shaft (11), lockwasher (15), preformed

packing (16) and leather washer (17).

(5)

Remove two retaining rings (18), pin (19), lever assembly (20), spring (21) and cap and pin (22).

(6)

Remove plug (23), preformed packing (24), preformed packing (25), valve seat (26) and preformed

packing (27).

(7)

Remove screw (28), seat (29), plunger (30) and spring (31).

(8)

Remove stem (32), lockwasher (33) and block (34).

(9)

Remove swivel adapter (35), preformed packing (36), and split ring (37).

NOTE

Remove two plates (39) only if illegible.

(10)

Remove four screws (38) and two plates (39) from meter housing (40).

5-37