GEAR LUBE DISPENSER

TM 5-4930-233-14

TM 4930-14/1

Information from pages 5-25 through 5-28 has been deleted

REEL CABINET ASSEMBLY

5-7. GEAR LUBE DISPENSER - REPAIR

This task covers:

a. Disassembly

b. Repair

c. Assembly

INITIAL SET-UP:

Materials/Parts

Equipment Condition

Dry cleaning solvent

Gear lube dispenser removed

(Item 6, App. E)

Tools

General Mechanics

Tool Box (Section III, Item 1, App B)

a. Disassembly

(1) Remove four screws (1) and remove dial assembly (2), gasket (3), and totalizer (4).

(2) Remove nozzle assembly (5) and extension (6).

(3) Remove nut (7), plug (8), preformed packing (9), lockwasher (10), stem (11) and preformed packing (12).

(4) Remove metering mechanism (13) and spur gear (14).

(5) Remove setscrew (15), worn gear (16), flat washer (17), gear and shaft (18), washer (19), preformed packing

(20), and leather washer (21).

(6) Remove two retaining rings (22), pin (23), lever assembly (24), spring (25), and cap and pin (26).

(7) Remove plug (27), preformed packing (28), preformed packing (29), valve seat (30) and preformed packing

(31).

(8) Remove screw (32), seat (33), plunger (34) and spring (35).

Change 1

5-29