PANELS - REPLACE

TM 5-4930-233-14

TM 4930-14/1

ENCLOSURE AND SKID ASSEMBLY

4-13.

PANELS - REPLACE - (Cont.)

Installation

NOTE

Step 3 applies to all panels. For other steps, proceed as needed.

(1)

For right rear panel, position storage pocket (8) and install using nine rivets (7).

(2)

For front and rear side panels, coat back side of handle (6) with epoxy-polymide primer and install

using four rivets (5).

(3)

Position panel (4) and install using rivets (3) as necessary. Seal panel along all outside edges with

synthetic rubber caulking compound.

(4)

For top panel, install eight hooks (2) using rivets (1) as necessary.

4-21