OPERATION OF AUXILIARY EQUIPMENT (CONT)

TM 5-4930-233-14

TM 4930-14/1

Tire Inflator, Pressure Gage and Chucks (4). An air chuck and gage with quick-operating air line coupling

nipple, used for inflating tires, is located in the upper drawer compartment.

Flexible Extension Adapter (5). Two giant buttonhead whip-end hoses, each with a 500 psi pressure relief

valve, and equipped with giant buttonhead fittings, are part of the auxiliary equipment on the lubricating unit

and are stored in the upper drawer compartment.

Flexible Extension Adapter (6). Two standard buttonhead whip-end hoses, each with a 500 psi pressure

relief valve, and equipped with standard buttonhead fittings, are part of the auxiliary equipment on the

lubricating unit and are stored in the upper drawer compartment.

Extension Hydraulic Pressure Relief Adapter (7). One extension hydraulic pressure relief adapter with 500

psi pressure relief valve, and one rigid extension without a valve are furnished on the lubricating unit. The

adapter with a relief valve is used for greasing seal-type lubrication points, to prevent rupturing seals when

using power lubricating equipment. A sliding sleeve locks firmly on the coupler of the hydraulic adapter.

Air blow gun (8). One airblow gun may be attached to the air hose quick-disconnect coupler of the

lubricating unit to permit cleaning with air pressure.

2-23