How to Locate Repair Parts. - TM-5-4130-235-23P0005

TM 5-4130-235-23P

range of items.

in which its parts are listed as repair parts or are listed at

the end of the repair parts listing for the last figure

containing parts of the kit

NOTE

How to Locate Repair Parts.

When

stock

numbered

item

a. When National Stock Number or Part Number

requisitioned, the repair part received may

is Unknown:

have a different part number than the part

being replaced.

(1) First. Using the table of contents, determine

the functional group within which the repair part belongs

e. Federal Supply Code for Manufacturer

This necessary since illustrations are prepared for

(FSCM). The FSCM is a 5-digit numeric code listed in

functional groups, and listings are divided into the same

SB 708-42 which is used to identify the manufacturer,

groups

distributor, or Government agency, etc

(2) Second. Find the illustration covering the

f. Description. Indicates the Federal item name

functional group to which the item belongs

and, if required, a minimum description to identify the

(3) Third. Identify the item on the illustration

item Items that are included in kits and sets are listed

and note the illustration figure and item number of the

below the name of the kit or set with the quantity of each

repair part

item in the kit or set indicated in the quantity incorporated

(4) Fourth. Using the Repair Parts Listing, find

in unit column When the part to be used differs between

the figure and item number noted on the illustration

serial numbers of the same model, the effective serial

b. When National Stock Number or Part Number

numbers are shown as the last line of the description In

is Known.

the Special Tools List, the initial basis of issue (BOI)

appears as the last line in the entry for each special tool,

(1) First. Using the Index of National Stock

TMDE, and support equipment. When density of

Numbers and Part Numbers, find the pertinent National

equipments supported exceeds density spread indicated

stock number or part number This index is in NTIN

in the basis of issue, the total authorization is increased

sequence followed by a list of part numbers in

accordingly

alphameric sequence, cross-referenced to the illustration

g. Unit of Measure (U/M). Indicates the standard

figure number and item number

of the basic quantity of the listed item as used in

(2) Second. After finding the figure and item

performing the actual maintenance function. This

number, locate the figure and item number in the repair

measure is expressed by a two-character alphabetical

parts list

abbreviation (e g , ea, in, pr, etc) When the unit of

measure differs from the unit of issue, the lowest unit of

c. The following publications pertain to the

issue that will satisfy the required units of measure will

Generator Set and its components.

be requisitioned

h. Quantity Incorporated in Unit. Indicates the

TM 5-4130-235-13

Operator, Organizational, Direct

quantity of the item used in the breakout shown on the

Support Maintenance Manual

illustration figure, which is prepared for a functional

group, subfunctional group, or an assembly A "V"

appearing in this column in lieu of a quantity indicates

that no specific quanity is applicable (e g, shims,

spacers, etc

4. Special Information.

Repair parts kits and gasket sets appear as the last

entries in the repair parts listing for the figure