 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Steering Valve
REMOVAL:
1. Park machine on level ground, set parking brake,
lower blade and place dozer control lever in HOLD
position.
2. Remove front and rear floor plates.
3. Clean all dirt from around hydraulic tank filter head.
Remove capscrews and lift off filter head to vent suction
line.
Note: Check valves are located In hydraulic tank return
lines to prevent tank from draining. Filter head must be
vented to prevent hydraulic oil from siphoning out.
Steering Valve and Column Mounting
4. Clean area around steering valve and hose
connections.
5. Disconnect hoses from steering valve. Plug hoses
and valve fittings and tag hoses with position for easier
assembly.
8. Remove valve mounting bolts and remove valve
assembly.
7. Reverse procedure for reassembly.
Venting Suction Line
Rev. 760501
K300
60-4.1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals