Reassembly of Hub and Drum Assembly (CONT)

3. Lubricate inner wheel hub bearing cone with gear oil

and position in wheel hub bearing cup (Fig. 146).

FIG. 149

6. Position brake drum on hub. Install bolts and flat

washers. Tighten bolts to torque specifications (Fig.

FIG. 146

150).

4. Coat outside diameter of oil seal with Permatex No.

2. Lubricate lip of seal with Lubriplate. Press or drive

oil seal into hub using seal driver (Fig. 147). Fig.

148 shows driver dimensions. Spring-loaded lip of

seal must face inward. Wipe off excessive Permatex

after seating seal.

FIG. 150

7. Lock-wire bolts in pairs (Fig. 151).

FIG. 147

FIG. 151

FIG. 148

5. Position oil catcher on hub (Fig. 149).