Disassembly of Differential Case Parts

7. Remove lower spring and side gear from differential

10. If necessary to remove center cam from spider, use

case (Fig. 74).

three small screwdrivers or tapered wedges to spread

snap ring into spider (Fig. 77). Press center cam out

through spider.

8. Lift spring retainer from driven clutch (Fig. 75).

11. Remove snap ring from spider (Fig. 78).

9. Remove holdout ring, using expanding snap ring pliers

(Fig. 76).

Disassembly of Differential Case Parts

Remove nuts that secure ring gear to case half. Place

case half and ring gear in press and apply light

pressure to hold parts while removing nuts (Fig. 79).