Disassembly of Brake Shoes

Pry out oil seal (Fig. 45).

6. If any wheel studs are damaged, remove nut that

secures each stud to hub. Drive out studs. Always

re- place entire set if any are damaged (Fig. 48).

Disassembly of Brake Shoes

Lift out bearing cone (Fig. 46).

1. If worn or damaged, press brake shoe bushing from

brake shoe (Fig. 49). If inside diameter of bushing

exceeds 1.513" for 20x5 brakes, or 1.263" for

161/2x6 brakes, it should be replaced.

5. If replacement of the bearing cups is required, drive

out cups with a soft drift (Fig. 47). Exercise care to

prevent damage to the bearing bores when driving

2. Remove cotter pin and drive out cam roller pin lock

out cups.

pin with punch (Fig. 50).