REMOVE FUEL FILTER BASE (INDUSTRIAL ENGINE)

3208 INDUSTRIAL AND MARINE ENGINES

DISASSEMBLY AND ASSEMBLY

FUEL FILTER BASE, OIL PAN

REMOVE FUEL FILTER BASE (INDUSTRIAL

ENGINE)

11-1262

Tools Needed

2P8250

Strap Wrench

1. Remove fuel filter housing (4) and element from

fuel filter base with tool (A).

2. Remove two bolts (1) and disconnect fuel lines

(3).

3. Remove fuel filter base (2).

INSTALL FUEL FILTER BASE (INDUSTRIAL

ENGINE)

12-1262

1. Put fuel filter base in position on bracket and

install the bolts that hold it in place.

2. Connect the two fuel lines to the base.

3. Install fuel filter housing.

REMOVE OIL PAN (INDUSTRIAL

ENGINE)

11-1302

1. Remove the oil from the engine.

2. Remove bolts (1) and remove oil pan (2).

INSTALL OIL PAN (INDUSTRIAL

ENGINE)

12-1302

1. Inspect the gasket for the oil pan. Install a new

gasket if needed.

2. Put oil pan in position on the engine and install

the bolts that hold it in place. Tighten the bolts

to a torque of 17 3 lb.ft. (2.4 0.4 mkg).

3. Fill the engine with oil to the correct level.