 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
FUEL TRANSFER PUMPS
REMOVE FUEL TRANSFER PUMP
11-1256
Tools Needed
A
B
C
2P8316
Bracket Assembly
1
3P1544
Timing Pin
1
2H3740
Bolt
1
start by:
a) remove fuel injection pump housing
and governor
1. Install the fuel injection pump housing on tool (A).
2. Remove a bolt from cover (1). Turn the in-
jection pump camshaft until tool (B) can be
installed in the camshaft.
3. Install tool (C) In the threads of the sleeve
(3). Tighten the bolt until the sleeve can be
removed.
4. Remove the four bolts (4) that hold the
body to the housing,
5. Remove the body (2) from the housing.
6. Remove the idler gear (5) from the body.
7. Remove the O-ring seal (6) from the body.
Remove the two lip type seals (7) from the
body.
8. Remove the drive gear (9) from the shaft.
9. Remove the key (8) from the shaft.
24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals