REMOVE FUEL INJECTION PUMPS

3208 INDUSTRIAL AND MARINE ENGINES

DISASSEMBLY AND ASSEMBLY

FUEL INJECTION PUMPS

REMOVE FUEL INJECTION PUMPS

11-1251

Tools Needed

8S2243

Wrench

8S2244

Extractor

CAUTION : Before any service work is to be done

on this fuel system, the outer surface of the injec-

tion pump housing must be clean.

NOTE: The fuel injection pump housing and gov-

ernor has been removed from the engine for illus-

tration purposes.

1. Remove the flange (1) and the flange assem-

bly from the cover.

2. Remove the cover (2) from the pump housing.

3. Remove the bypass valve (3) and springs

from the pump housing.

4. Install tooling (A) on the fuel injection

pump and loosen the bushing from the

pump housing.

NOTE: Do not loosen the screws (4) that hold the

levers to the shaft when removing or installing

pumps. If the levers are moved, fuel pump. cali-

bration will be changed.

5. Remove the fuel injection pump (5) from

the pump housing. The sleeve (6) on the

plunger will slide off the lever as the pump

is removed.

6. Do Steps 4 and 5 for the remainder of the

pumps.