FUEL INJECTION PUMP HOUSING AND GOVERNOR

3208 INDUSTRIAL AND MARINE ENGINES

DISASSEMBLY AND ASSEMBLY

FUEL INJECTION PUMP HOUSING AND GOVERNOR

5. Remove the plug from the timing hole in the

front cover and install a 5/16"-18 NC bolt (5) 2

1/2 in. long. The cover bolt from hole (6) can be

used. Turn the crankshaft (clockwise) until bolt

can be installed into the timing gear and is in the

center of the timing hole. The camshaft for the

fuel injection pump is now in correct time to the

engine.

6. Remove line (7). Remove bolts (8) from base

of the fuel injection pump housing.

7. Remove the fuel injection pump housing and

governor

unit.