INTRODUCTION - TM-5-3895-349-14-P0378

INTRODUCTION

This publication has instructions and procedures for the subject on the front

cover. The information, specifications, and illustrations in this publication

are on the basis of information that was current at the time this issue was

written.

Correct operation, maintenance, test and repair procedures will give this

product a long service life. Before starting a test, repair or rebuild job, the

serviceman must read the respective sections of the Service Manual, and

know all the components he will work on.

Your safety, and the safety of others, is at all times very important. When

you see this symbol (+)or this symbol ( ! )in the manual, you must

know that caution is needed for the procedure next to it. The symbols are

warnings. To work safely, you must understand the job you do. Read all

instructions to know what is safe and what is not safe.

It is very important to know the weight of parts. Do not lift heavy parts by

hand. Use a hoist. Make sure heavy parts have a good stability on the ground.

A sudden fall can cause an accident. When lifting part of a machine, make

sure the machine has blocks at front and rear. Never let the machine hang on

a hoist, put blocks or stands under the weight.

When using a hoist, follow the recommendation in the manual. Use correct

lift tools as shown in illustrations to get the correct balance of the

component you lift. This makes your work safer at all times.

40400X3