WHEEL REMOVAL:

WHEELS

Note: Mark wheels before removing for easier

assembly.

5. Remove wheel nuts and lift wheel from axle.

6. Reverse procedure for installation, torque

nuts to 450 ft-lbs (62 m-kg) and readjust wheel

cleaner teeth.

WHEEL INSTALLATION:

When remounting wheels, care must be taken to

install the wheel on the correct side. Wheels should

be installed so that tooth pattern forms a diamond as

illustrated below.

WHEEL REMOVAL:

1. Park machine on level ground, set parking

brake and lower blade.

2. Jack up each wheel individually, blocking

securely so that wheels clear ground.

3. Remove all wheel cleaner teeth and fenders.

4. Attach hoist and sling to wheel and hold taut.

Wheel Installation

Rev. 760501

K300

20-5.1