GENERAL OPERATING PROCEDURES Continued

TM5-3655-214-13&P

2-6. GENERAL OPERATING PROCEDURES Continued

d. Monitor the weight of service cylinder when the service cylinder is filled to the desired weight and shutdown the

recharging unit.

(1)

Press STOP pushbutton on starter control box.

(2)

Close valve on service cylinder and supply

cylinder.

(3)

Close discharge shutoff valve.

WARNING

Use care to protect your flesh from

contact with Carbon Dioxide (C02). It

produces an effect similar to a scald or

burn. Stay clear of the inlet bleed valve

outlet port and the discharge blow-off

valve outlet port.

(4)

Slowly open (crack) the discharge blowoff valve

and the inlet bleed valve.

(5)

Disconnect hose from service cylinder.

2-10