START PROCEDURE

TM 5-3610-254-14

2-17. START PROCEDURE

Starting the System.

a. Set commercial power breaker to ON or start the generator set in accordance with the applicable Department of

the Army Technical Manual.

b. Set all circuit breakers in the main power service box to ON.

c. Set fluorescent light switches to on.

d. Set the air conditioner controls for the desired mode of operation temperature setting.

2-18. SHUTDOWN PROCEDURE

WARNING

Death or serious injury could result if electrical precautions are not taken when maintaining this equipment. Be sure that

power cables are unplugged/disconnected, that circuit breakers are set to OFF and that generator cables are

unplugged/disconnected. Be sure that the generator/commercial power system is properly grounded. Always have

another person standing by who is familiar with electrical shock first aid.

a. Set all equipment and shelter power switches to the off or neutral position.

b. Set all circuit breakers in the main power service box to OFF.

c. Set commercial power breaker to OFF or shut down the generator set power source in accordance with the

applicable Department of the Army Technical Manual.

d. Disconnect the main power cable from the generator power source.

e. Disconnect the cable from the main power receptacle.

f. Coil and correctly stow main power cable.

2-21