NONMETALLIC TUBING ASSEMBLY

TM 3-6665-329-13&P

NOTE

Following procedures are typical for all nonmetallic tubing assemblies except pressure

and vacuum test and flowmeter nonmetallic tubing assemblies.

This task covers:

Removal.

Installation.

INITIAL SETUP

Tools:

Electronic equipment tool

kit TK-100/G

Equipment condition: Lid and panel assembly removed during troubleshooting.

Materials/Parts: Front ferrule Part No. 403-1-2 each

Back Ferrule Part No. 404-1-2 each

Removal

NOTE

Do not remove the panel assembly to replace the nonmetallic tubing assembly

connected to the flow rate meter and the flowmeter bushing.

(1) Unscrew two nuts (1) and remove nonmetallic tubing assembly (2).

3-67