PANEL ASSEMBLY (CONT)

TM 3-6665-329-13&P

Testing

Perform Functional Test (para 3-5) on new panel assembly,

Installation

(1) Unscrew two screws (4) on new panel assembly.

(2) Raise flowmeter (5) and lock in position with spring lock hinge (6).

(3) Insert one hand into flowmeter opening and place fingers around right flowmeter bracket (7).

(4) Grasp binding posts (8) with other hand.

BE SURE TUBING IS NOT BETWEEN PANEL ASSEMBLY AND CASE CENTER SUPPORT.

(5) Place panel assembly (9) into case (10).

(6) Secure to case with 21 flatwashers (3), Iockwashers (2), and screws (1).

(7) Lower flowmeter (5) and finger tighten two screws (4).

3-52