REMOVAL - TM-3-4240-309-20-P0131

3-4240-309-20&P

LOCATION

ITEM

ACTION

Housing Unit

Main fan/

1. Set POWER switch (1) on compartment control

dust collector

module to OFF. Turn off power at source.

2. Disconnect electrical cable plug P4 (2) from

power distribution unit (3).

3. Loosen hose clamps (4) on airduct hose (5).

4. Compress the airduct hose (5) until it can be

removed from inlet collar (6) and inlet

transition (7).

5. Loosen hose clamps (8) on exhaust sleeve (9).

6. Loosen hose clamp (10) on inlet transition (7),

and carefully pull inlet transition (7), off of dust

collector (11).

7. Remove eight screws (12) and washers (13),

and pull dust collector (11) attached to main

fan (14) from housing unit (15).

8. Remove main fan rubber bushing (16) from

housing unit (15), and remove rubber bushing

(16) from electrical cable (17).

2-111