|
|
TM
3-4240-309-20&P
2-15. M87 GAS-PARTICULATE FILTER UNIT (CONT).
ACTION
LOCATION
ITEM
1. Set POWER switch (1) on compartment control
Inlet collar
Gas-Particulate
module to OFF.
Filter Unit
2. Remove inlet cap (2) (p. 2-103).
3. Loosen hose clamp (3) on top of airduct
hose (4).
4. Remove four screws (5) from front filter unit
stand (6) and inlet collar (7), and pull inlet
collar (7) from airduct hose (4).
1. Slip inlet collar (7) into airduct hose (4).
2. Install and tighten four screws (5) through inlet
collar (7) and into front filter unit stand (6).
3. Tighten airduct hose clamp (3).
4. Install inlet cap (2) (p. 2-103).
2-100
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |