INSTALLATION - TM-3-4240-309-20-P0093

3-4240-309-20&P

ACTION

ITEM

LOCATION

1. Erect protective entrance. Refer to erect

Protective

M10 Protective

procedures on top of entrance and inside

entrance

Entrance

entrance on right-hand wall (p. 1-4).

2. Insert interface fabric (5) into channel (6) to

depth of arrow mark (7) on fabric.

3. Tighten screws (4) along channel.

4. Install airduct hose (2) on inlet (3).

5. Tighten hose clamp (1).

Painting

Touchup painting of metal surfaces is authorized.

M10 Protective

Entrance

1. Clean surface to be painted using rags (item 6,

app D) and dry cleaning solvent (item 3,

NOTE

Refer to TM 43-0139 for painting

instructions for field use.

2. Paint surfaces with one coat of primer (item 5,

3. Paint surfaces of equipment mounted outside

of the protective entrance with polyurethane

coating (item 4, app D).

2-73