CHAPTER 2 MAINTENANCE INSTRUCTIONS - TM-3-4240-309-20-P0021

TM 3-4240-309-20&P

CHAPTER 2

MAINTENANCE INSTRUCTIONS

Section I REPAIR PARTS, SPECIAL TOOLS, TEST, MEASUREMENT, AND

DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT EQUIPMENT

2-2. SPECIAL TOOLS, TMDE, AND SUPPORT

2-1. COMMON TOOLS AND EQUIPMENT. For

EQUIPMENT. No special tools, TMDE, or support

authorized common tools and equipment, refer to

equipment are required.

the modified table of organization and equipment

(MTOE) applicable to your unit.

2-3. REPAIR PARTS. Repair parts are listed and

illustrated in appendix C of this manual.

Section II SERVICE UPON RECEIPT

2-4. SERVICE UPON RECEIPT. Refer to the appropriate maintenance manual.

TM 11-5865-234-23&P . . . . . . . . . . . . . . . . . . . . . . . Surveillance Information Processing Center, AN/TSQ-105

NSN 5895-01-177-6015

Section Ill PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

2-5. PMCS PROCEDURES.

c. Item To Be Inspected Column. The items listed

a. General. The PMCS procedures are contained in

in this column are divided into groups indicating the

table 2-1. They are arranged in logical sequence

portion of the equipment of which they are a part

requiring a minimum amount of time and motion

(for example, Falter Unit, Protective Entrance).

on the part of the persons performing them and are

Under these groupings, the items to be inspected are

arranged so that there will be a minimum

identified by as few words, usually the common

interference between persons performing checks

name, as will clearly identify the item (for example,

simultaneously on the same end item.

main fan assembly, airflow valve).

b. Item Number Column. Checks and services are

d. Procedures Column. This column contains a

numbered in chronological order regardless of

interval. This column shall be used as a source of

brief description of the procedure by which the check

item numbers of the TM Number column on DA

is to be performed. It contains all the information

Form 2404, Equipment Inspection and Maintenance

required to accomplish the checks and services,

Worksheet, in recording results of PMCS.

including appropriate tolerances, adjustment limits,

and instrument and gage readings.

2-1