Section II. MAINTENANCE PROCEDURES FOR M10 PROTECTIVE ENTRANCE

TM 34240-284-30&P

Section II. MAINTENANCE PROCEDURES FOR M10 PROTECTIVE ENTRANCE

c. Illustrations are configured to show access to the

2-8. Scope.

specific components being-addressed and may not

a. This section contains repair procedures for com-

show the true position of the item or items being main-

Ponent Parts of the M10 protective entrance.

tained or disassembled.

b. Disassemble only as necessary to gain access to

d. Identify wiring prior to unsoldering connection to

desired components.

simplify reassembly.

2-9. PROTECTIVE ENTRANCE CONTROL MODULE - MAINTENANCE INSTRUCTIONS.

This task covers:

d. Removal

a. Disassembly

e. Installation

b. Repair

c. Reassembly

Troubleshooting References

Tools

Electronic Equipment Tool

Kit TK-105/G (SC 5180-91-CL-R07)

Equipment Condition

PECM removed from the protective entrance.

References

TB SIG 222

ACTION

ITEM

LOCATION

Protective entrance control 1. Remove twelve screws (1) from panel (2).

module

2 Carefully pull panel (2) away from housing (3).

1. Place panel (2) on housing (3) and secure with

Protective entrance control

module

twelve screws (1).

2-137