|
|
TM 3-4240-284-20&P
2-17. POWER DISTRIBUTION UNIT - MAINTENANCE INSTRUCTIONS (CONT).
LOCATION
ITEM
ACTION
REMOVAL
Power Distribution Unit
Identificatio plate
Lift edge of plate (1) with a sharp tool.
Pull plate completely off the mounting surface.
INSTALLATION
Thoroughly dean mounting surface with dry-cleaning
solvent (item 4, app D). Mounting surface must be free
of all contamination such as oil, grease, dirt or any
foreign matter.
Activate the back of the plate with dry-cleaning solvent
(item 4, app D).
Mount plate (1) and apply pressure to the plate surface.
Spray or brush plate with aliphatic polyurethane coating
(item 2, app D).
2-86
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |