INSTALLATION - TM-3-4240-284-20-P0100

TM 3-4240-284-20&P

2-14. M56 GAS-PARTICULATE FILTER UNIT - MAINTENANCE INSTRUCTIONS (CONT).

ACTION

ITEM

LOCATION

REMOVAL

Lift edge of plate with a sharp tool.

Identification plate

M56 Gas-Particulate Filter

Unit

Pull plate completely off the mounting surface.

INSTALLATION

Thoroughly clean mounting surface with dry-cleaning

solvent (item 4, app D). Mounting surface must be free

of all contamination such as oil, grease, dirt or any

foreign matter.

Activate the back of the mounting plate with dry-

cleaning solvent (item 4, app D).

Mount the plate (1) and apply pressure to the

plate surface.

Spray or brush plate with aliphatic polyurethane coating

(item 2, app D).

PAINTING

Filter housing, compart-

Touch-up painting is authorized.

ment control module, and

power distribution unit

Thoroughly clean the surfaces to be repainted. U&rags

(item 6, app D) and dry-cleaning solvent (item 4, app D).

NOTE

Refer to TM 43-0139 for painting instruc-

tions for field use.

Paint surfaces with one coat of primer (item 5, app D).

Paint primed surfaces with aliphatic polyurethane coat-

ing (item 2, app D).

2-78